- Updated for January 2025
- Based on 2025 MS commercial driver's license manual
Free Mississippi CDL Combination Practice Test 2025
Here are the three main classes of Commercial Driver’s Licenses (CDLs): A Class A CDL allows you to operate a combination vehicle with a gross combination weight rating (GCWR) of 26,001 pounds or more, provided the towed vehicle(s) has a gross vehicle weight rating (GVWR) of more than 10,000 pounds. Typically, this is the class of CDL you want for operating semi-trucks and tractor-trailers. A Class B CDL allows you to operate a single vehicle with a GVWR of 26,001 pounds or more or a combination vehicle where the towed vehicle has a GVWR of 10,000 pounds or less. This class of CDL is typically for operating large buses and straight trucks, including box trucks and most dump trucks. A Class C CDL allows you to operate other kinds of commercial vehicles that transport hazardous materials or at least 16 occupants (including the driver). This class of CDL is typically for operating small buses (including shuttle buses) or small trucks carrying hazardous materials.
To obtain a CDL of any of these three classes, you must pass the General Knowledge test on general commercial driving theory and a skills test in a vehicle that’s representative of the class of CDL you’re applying for. But to drive combination vehicles, that’s not all you must do. To drive combination vehicles, you must also pass the Combination Vehicles knowledge test on the theory of operating combination vehicles. Both of these knowledge tests are based on the official Mississippi Commercial Driver’s License Manual (Mississippi CDL Handbook 2025). You were likely advised to read this study guide (especially Chapter 6 on combination vehicles) to prepare for the Combination Vehicles knowledge test. But do you feel you could use more help to pass the test than the manual is giving you? If so, we can help you, just as we’ve helped thousands of other aspiring drivers.
This free Mississippi CDL Combination practice test is based on the official CDL manual, just like the official Combination Vehicles knowledge test. It’s up to date as of January 2025. There are 25 multiple-choice practice questions and answers on such topics as combination braking systems, combination driving techniques, coupling and uncoupling, and pre-trip inspections. Our automated assistant can give you a hint if you get stuck on a question or an explanation of the correct answer if you still miss the question. There’s no time limit; take all the time you need to learn and master the material covered by this practice test.
- Perfect for first-time and renewal CDL/CLP applicants, and those adding endorsements
- Triple-checked for accuracy
What you need to know
What to expect on the actual MS DPS exam
questions
correct answers to pass
passing score
Helpful links
List of questions (classic view)
- After you lock the kingpin into the fifth wheel, how should you check the connection?
- After you connect the air lines but before you back under the trailer, you should
- Which statement best illustrates the "crack-the-whip" effect?
- When you inspect the landing gear after uncoupling the trailer, where should the tractor be?
- What is the safest way to turn right from a two-way road?
- To drive a triple combination vehicle, you must have
- To prevent a rollover, cargo should be
- Combination vehicles take longer to stop when they are empty than when they are fully loaded, because
- If your vehicle gets stuck on a railroad track, you should
- Low-slung vehicles can be risky at railroad crossings because
- On a double or triple vehicle, which wheels offtrack the most?
- When you're pulling doubles or triples, the shut-off valves should always be
- On a trailer, where is the yellow antilock brake (ABS) malfunction lamp located?
- Even before antilock braking systems (ABS) were required, some vehicles already had them. How can you check if your vehicle has ABS?
- An antilock braking system (ABS) is useful
- After coupling, make sure that the air lines are not crossed. How should you do this?
- During uncoupling, you should disconnect the electrical cable and
- Before you start to uncouple, you must
- You can confirm that air is going to all brakes in your trailers by
- To uncouple a loaded trailer, after the landing gear has made firm contact with the ground, you should
- If the trailer has antilock brakes (ABS) but the tractor doesn't,
- To test the tractor protection valve, charge the trailer air brake system, turn off the engine, and
- If your test of the tractor protection valve is successful,
- The tractor protection valve is designed to close automatically if the air pressure falls into the pressure range specified by the manufacturer, typically
- As part of your vehicle inspection test, if your vehicle is equipped with air brakes and has a trailer, you will inspect the air connections between the truck or tractor and the trailer. Make sure that the ________ are locked in place and free of damage or air leaks.
- Alabama: Test 1 / Test 2
- Alaska: Test 1 / Test 2
- Arizona: Test 1 / Test 2
- Arkansas: Test 1 / Test 2
- California: Test 1 / Test 2
- Colorado: Test 1 / Test 2
- Connecticut: Test 1 / Test 2
- Delaware: Test 1 / Test 2
- District of Columbia: Test 1 / Test 2
- Florida: Test 1 / Test 2
- Georgia: Test 1 / Test 2
- Hawaii: Test 1 / Test 2
- Idaho: Test 1 / Test 2
- Illinois: Test 1 / Test 2
- Indiana: Test 1 / Test 2
- Iowa: Test 1 / Test 2
- Kansas: Test 1 / Test 2
- Kentucky: Test 1 / Test 2
- Louisiana: Test 1 / Test 2
- Maine: Test 1 / Test 2
- Maryland: Test 1 / Test 2
- Massachusetts: Test 1 / Test 2
- Michigan: Test 1 / Test 2
- Minnesota: Test 1 / Test 2
- Mississippi: Test 1 / Test 2
- Missouri: Test 1 / Test 2
- Montana: Test 1 / Test 2
- Nebraska: Test 1 / Test 2
- Nevada: Test 1 / Test 2
- New Hampshire: Test 1 / Test 2
- New Jersey: Test 1 / Test 2
- New Mexico: Test 1 / Test 2
- New York: Test 1 / Test 2
- North Carolina: Test 1 / Test 2
- North Dakota: Test 1 / Test 2
- Ohio: Test 1 / Test 2
- Oklahoma: Test 1 / Test 2
- Oregon: Test 1 / Test 2
- Pennsylvania: Test 1 / Test 2
- Rhode Island: Test 1 / Test 2
- South Carolina: Test 1 / Test 2
- South Dakota: Test 1 / Test 2
- Tennessee: Test 1 / Test 2
- Texas: Test 1 / Test 2
- Utah: Test 1 / Test 2
- Vermont: Test 1 / Test 2
- Virginia: Test 1 / Test 2
- Washington: Test 1 / Test 2
- West Virginia: Test 1 / Test 2
- Wisconsin: Test 1 / Test 2
- Wyoming: Test 1 / Test 2
Your go-to, trusted source
Experience the Driving-Tests differenceOur commitment to accuracy and quality in our practice tests
Explore our rigorous, multi-tiered verification process that ensures each question mirrors the official manual for unparalleled accuracy.
At Driving-Tests.org, we understand the importance of reliable and accurate practice tests to help you prepare for your DMV exam. That's why we've developed a meticulous process to create and continually update our practice questions, ensuring they reflect the most current driving laws and regulations.
Here's an inside look at how we maintain the highest quality in our practice tests.
Content Creation and Verification Process
- Alignment with Official Manuals:
Every question we develop is based on the most recent version of each state's official driving manual. Our team regularly monitors each state DMV's website for the latest updates to ensure our practice tests are always aligned with the most current information. - Community Feedback Integration:
We leverage feedback from our vast community of users to understand which topics are most frequently tested. This helps us focus on the areas that are most relevant and beneficial for your preparation. - Expert Content Creation:
Our in-house editor, Steven, who has extensive experience in driver education, crafts each question with precision. He conducts a thorough review of each question against the official manuals to ensure accuracy. - Rigorous Review Process:
Once Steven has finalized a set of questions, our team conducts a joint review session. This second level of scrutiny involves content accuracy, proofreading, and fact-checking to eliminate any errors. - User Feedback Mechanism:
After a question goes live on our site, we keep the lines of communication open. Each question features a feedback button, inviting users to report any issues or errors. This continuous feedback loop allows us to address and rectify any concerns promptly. - Responsive Updates:
In line with our commitment to accuracy, we quickly update our practice questions to reflect any changes in the DMV manuals. Additionally, we update the free electronic copy of the state's driver's license manuals on our site, typically within a few days after the DMV publishes them.
Our thorough quality control process ensures that you have access to practice tests that are as accurate and up-to-date as possible. We believe in the power of well-prepared drivers and are dedicated to providing you with the best study tools to help you succeed on your DMV exam.
Get your ELDT certificate and pass CDL exams the first time. Guaranteed.
Get full access to our 3-in-1 program, starting at $79. CDL schools charge $3,000-$4,000 for that.
All 1,500 MS exam-like questions
Pass Guarantee: pass your permit exam, or get your money back
ELDT certification included
Official FMCSA-approved provider, instant completion reporting
Industry-leading 99.06% success rate
Compare with the average US passing rate of 49%
Trusted by over 1.15 Million customers
The only program recommended by DMVs
